If you are running an Arlo camera and your Arlo camera not detecting motion can be a tricky thing to deal with. So how to fix Arlo camera not detecting motion?
How to fix Arlo Camera Not Detecting Motion
In this article, we are going to find out how you can do this on your own with simple troubleshooting. Make sure that you read the full article in order to have a grasp on the complexity of this issue. Although it may sound simple, it can be sometimes tricky to handle. Especially if you are new in the security camera world and this is your first camera. So, without further ado, let’s begin and start troubleshooting!
Step 1: Make sure that your Arlo camera is positioned properly
First thing to do is to make sure that your camera is positioned properly. Make sure that your Arlo camera is at a minimum of 3 meters from your Smart Hub or base station. Also, make sure that there is at least 6.5 feet distance between cameras.
This will make sure that the WIFI signals of your cameras are not interfering with each other.
Also, make sure that your router is positioned properly as well and also make sure that is transmitting enough signal for the cameras to work properly.
Step 2: Don’t aim your Arlo cameras at transparent objects
This is an important thing to do, because if you aim your cameras at objects that are transparent, such as glass for example. The motion sensor of the camera will decrease in performance. So, don’t aim your camera at glass, mirrors, or plastic.
Step 3: Make sure that motion detection is enabled
Make sure that your cameras are Armed. This means that they will trigger on any motion there is. By default, they are set to run for 10 seconds, but you can change this setting and run them for 5 minutes. Customize your settings for the best result.
Step 4: Make sure that sensitivity settings are not set on low
Double check that your sensitivity settings are not set on low. This means that your camera will not detect slight changes and will turn on when needed. You can do this by testing the motion detection.
- Open the Arlo app and login
- Go to Settings > My Devices
- Click on a device
- Click on Device Utilities > Motion Detection Test
- Move the slider to test the motion detection system. You will get an LED signal when there is motion.
Step 5: Make sure that you have enabled alerts and notifications
This is an important step because if you have not enabled notifications at your email address your camera will detect motion and will not send you any information. So make sure to turn on these features in your Settings.
Conclusion
In this article, we have covered how to fix Arlo camera not detecting motion. By following these simple steps, you can be sure that your Arlo camera will record motion, and you will be always properly notified about it.
READ NEXT: Arlo Camera Not Syncing