One popular brand in the robot vacuum market is Shark, known for its innovative features and powerful cleaning capabilities.
However, like any electronic device, there may come a time when you need to reset your Shark robot vacuum. Whether it’s due to a malfunction, connectivity issues, or simply to start fresh, resetting your Shark robot vacuum can help resolve various problems and get it back to optimal performance.
In this guide, we will help you through the process of resetting your Shark robot vacuum step by step.
How To Reset Shark Robot Vacuum
Step 1 – Power Off The Vacuum
To begin the reset process, make sure your Shark robot vacuum is powered off.
Look for the power button, usually located on the top or side of the device, and press and hold it until the vacuum shuts down completely. This step is essential to ensure a clean reset.
Step 2 – Disconnect The Dock
If your Shark robot vacuum is connected to its charging dock, unplug the dock from the power source and disconnect the vacuum from the dock.
This step ensures that the vacuum is completely disconnected from any power source or external devices.
Step 3 – Locate The Reset Button
Next, you’ll need to locate the reset button on your Shark robot vacuum. The location of the reset button may vary depending on the model, but it’s usually found on the underside or back of the device.
Refer to your user manual for specific guidance.
Step 4 – Press And Hold The Reset Button & Release It
Once you’ve located the reset button, use a small, pointed object such as a pin to press and hold the reset button. Hold it for around 10 to 15 seconds.
This duration may vary depending on the model, so check your user manual to see exactly how much you have to wait.
After holding the reset button for the specified time, release it. This action initiates the reset process, clearing any stored data or settings in the vacuum’s memory.
Step 5 – Power On The Vacuum
Now that you have completed the reset process, it’s time to power on your Shark robot vacuum. Press and hold the power button once again until the vacuum starts up.
Give it a few moments to start up and get a connection with any connected devices.
Step 6 – Reconnect To The Dock
If you were using a charging dock with your Shark robot vacuum, plug the dock back into a power source and reconnect the vacuum to the dock.
This step is crucial to ensure your vacuum can charge and operate efficiently.
Step 7 – Set Up Preferences
Once your Shark robot vacuum has powered on and reconnected, you may need to go through the initial setup process again.
Follow the instructions on the vacuum’s display or refer to the user manual to set up your cleaning preferences, such as scheduling cleanings or connecting to a Wi-Fi network.
If you followed these steps slowly and did everything we mentioned, your Shark robot vacuum will be fully reset.
However, if this issue did not work, there could be an issue with the hardware inside the vacuum. From that point on, we suggest you go to your local store and see if a certified servicer can fix the vacuum.
Why Should You Reset Your Shark Vacuum?
Resetting your Shark robot vacuum is a straightforward process that can help resolve various issues and restore optimal performance. By following the steps outlined in this article, you can reset your Shark robot vacuum with ease and get back to enjoying the convenience of automated cleaning in your home.
READ ALSO: