How To Reset Wisenet DVR

DVR stands for Digital Video Recorder and it is a type of device that is used to access the video footage from your camera and store it into a hard disk.In this guide, we will tell you how to reset the Wisenet DVR to factory settings.

The process of resetting your DVR unit can vary on its model number and manufacturing year, most DVRs can be reset by following this guide. Do note that all the configured will be erased including the username and password of the device and you need to configure it from the start.

How To Reset Wisenet DVR

To reset your Zosi DVR to factory settings, follow these steps:

1. Ensure that your DVR device is powered off and then remove the power supply cable connected to it.

2. Now hold the reset button at the back of the device for 10 seconds

3. Release the button and then reconnect the power supply cable.

4. Wait for the DVR device to start up and then you will notice that it has been reset to factory default mode

That’s it, you can follow these steps to reset your Wisenet DVR device. In case of any doubts, you can always refer to the product manual of your DVR unit.